How to Use a Snatch Block With a Recovery Winch
A snatch block is a heavy duty pulley that opens at the side, so you can drop a winch line into it without threading the hook through. It lets you change the direction of a pull, or double the line back to roughly double your pulling power.
Two jobs, one simple tool
A snatch block does two things: it redirects a pull around a corner, and it multiplies the pulling power of your winch.
When you run the line out through the block and back to the truck, the winch pulls with roughly twice the force, at about half the speed. That's often the difference between a stuck car moving and the winch stalling.
- Changing the angle of a pull
- Pulling a car out from beside a wall or ditch
- Roughly doubling pull on a double line
- Taking strain off the winch motor
- Keeping the line straight onto the drum
- Working around obstacles
On a double line, the block carries up to twice the line pull. Choose a block rated above that.
2 tonne or 4 tonne
Match the block to the load it will actually see, not the winch on its own.
2 tonne snatch block
2,000kg rated. For lighter winches and redirect pulls on smaller vehicles.
4 tonne snatch block
4,000kg rated. The safer choice with a 13,500lb winch or for double-line pulls on heavier vehicles.
Double-line pulls
The block sees up to twice the line force, so size up.
Redirect pulls
The load on the block depends on the angle. The sharper the turn, the higher the load.
Anchor points
The anchor for the block must be rated for the load too.
Inspect before use
Check the hook, sheave and side plates for wear or damage.
A basic double-line pull
Attach the block to the vehicle
Use a rated strap or recovery point on the vehicle being pulled.
Open the side plate and seat the line
Drop the winch line over the sheave and close the plate.
Run the hook back to a rated point
On the truck or a solid anchor near it.
Clear the area and winch slowly
Keep everyone out of the line of pull.
The block is part of the load path
If anything in the line fails, it can fly back with a lot of force. Every strap, shackle and anchor must be rated for the load, and nobody should stand in line with a tight cable.
If you're not confident rigging a pull, get someone experienced to show you first.
Other recovery equipment guides
Help choosing the rest of your kit.
Snatch blocks, answered
Does a snatch block really double my winch power?
Roughly, yes, when you double the line back. You lose a little to friction, and the pull is slower.
Which size do I need with a 13,500lb winch?
The 4 tonne block, because on a double line the block can see more than a 2 tonne rating.
Can I use a snatch block with synthetic rope?
Yes, as long as the sheave is smooth and free of burrs that could damage the rope.
Are your snatch blocks tested?
Yes. Each one is individually proof-load tested and CE certified.
Do you deliver?
Yes, across Ireland and Northern Ireland.
Questions about rigging?
Ring 086 158 2524.
